...searching
Here's a step-by-step walkthrough on how you can give your tyres some much-needed TLC:
Materials You'll Need
• A bucket of warm water
• A scrub brush
• A sponge or wash mitt
• A tyre cleaner
• A tyre shine product
• Microfiber towels
Step 1: Rinse the Tyres
Before you get into the nitty-gritty of cleaning your tyres properly, you should give them a rinse them with water. This will remove any loose dirt or debris. Your best way to do this is with a hose or pressure washer.
Step 2: Apply Tyre Cleaner
Now they have been rinsed, it is time to apply a tyre cleaner to the sidewalls. There are a few different products of this nature on the market. So be sure to follow the instructions on the specific product you have chosen.
Different cleaners may have different application methods
Step 3: Scrub the Tyres
To give the tyres a good clean, you will need to use a scrub brush. Work the cleaning product the tyre, focusing on the sidewalls. This is where most of the dirt and grime tends to accumulate.
Step 4: Rinse the Tyres Again
With newly scrubbed tyres, rinse them again with water. Again, this is to remove the cleaner and any remaining dirt.
Step 5: Dry the Tyres
Now comes the time to dry. You can use a microfiber towel to dry your newly cleaned tyres completely. Be sure to get in between the treads and around the lettering on the sidewalls.
Step 6: Apply Tyre Shine Product
Once you have fully dried the tyres apply a tyre shine or tyre dressing. Again, like with cleaning product, there are many of these to choose from. Follow instructions on the label of your chosen tyre shine.
These normally coming in the format of a spray or a gel.
Step 7: Buff the Tyres
Finally use a clean microfiber towel to buff the tyres. If then properly you can get a nice sheened finish to your tyres. Remember to remove any excess product.
Step 8: Step back
Step back and enjoy the fruits of your labour – a clean and shiny set of tyres.